Skip to main content

Calculate Rise and Run Dimensions — Calculate Riser and Tread Dimensions

Beginner4 hours

Part of project

How to Lay Out a Stair Stringer with a Framing Square · Step 3 of 6

Helpful?

In this video

Using the total vertical rise measurement (from the finished floor downstairs to the finished floor upstairs) and the new number of desired rises (incorporating the extra rise gained from header adjustment), calculate the exact height for each individual rise. Similarly, calculate the exact depth for each individual tread (run) by dividing the total horizontal run by the number of treads (which is typically one less than the number of rises). The video demonstrates calculations: Total Rise = 121 7/8 inches (121.875 decimal) divided by 16 rises equals 7.61 inches, converted to 7 5/8 inches per rise (within 8-inch max code). Total Run = 144 3/8 inches (144.375 decimal) divided by 15 treads equals 9.625 inches, converted to 9 5/8 inches per tread (within 9-inch min code). Ensure these dimensions adhere to local building codes for safety and comfort.

405.5K views15.5K
stairbuilding

75K subscribers

View Channel

FAQs

What is the most critical tool for ensuring accurate stair stringer layout?

The framing square, especially when used with stair gauges, is indispensable for consistently marking the rise and run on the stringer. A construction calculator is also highly recommended to minimize mathematical errors and ensure precise measurements.

How important is accuracy when marking a stair stringer, and what are the safety implications?

Accuracy is paramount for safety; even small errors can lead to uneven steps, creating a significant tripping hazard. Double-check all measurements and markings before cutting, as consistent riser heights and tread depths are crucial to prevent falls.

Can I use different materials for stair stringers, or is pressure-treated pine always necessary?

While pressure-treated pine is excellent for outdoor use or areas prone to moisture, untreated lumber like Douglas fir or Southern Yellow Pine can be used for indoor stairs. Always select straight, knot-free lumber of appropriate dimensions that meets local building codes for structural integrity.

What's a common mistake beginners make when laying out stringers, and how can I avoid it?

A frequent error is forgetting to account for the thickness of the treads and the necessary bottom cut for the finished floor. Ensure you deduct the tread thickness from the bottom riser and factor in the nosing overhang for consistent steps from top to bottom.

Transcript
Hide

so for right now it's time for me to sort of take off the microphone get my head into the game for the last time and get a set of stairs built total rise is 121 and 7 8 inches converted to decimals is 121.8 divided by 16 rises is 7.61 inches converted to fractions is 7 and 5 8 week that means i'm going to lay out 16 rises on this set of stairs 7 and 5 8 each that's the baseline the code max is 8 inches so we're very comfy there the run the total run that we've decided to use is a hundred and forty four and three eighths roughly converted to decimals is a hundred and forty four point three seven five divided by 15 treads because there's one less tread than there is total risers equals 9.625 inches per tread which converts to 9 and 5 8 inches which means we have 15 runs treads at nine and five-eighths inches the minimum is nine so we're well within the minimum tread length we exceed the minimum tread length and we are well underneath the maximum rise

Auto-generated transcript. May contain errors.