Skip to main content

Calculate Number of Risers — Calculate Number of Risers and Treads

Beginner4 hours

Part of project

How to Lay Out a Stair Stringer with a Framing Square · Step 2 of 6

Helpful?

In this video

To calculate the number of risers, divide your 'total rise' measurement by a comfortable and code-compliant 'unit rise' (the height of a single step). Standard building codes often suggest a maximum unit rise of about 7.75 inches, but a comfortable height is usually around 7.5 inches. In the video's example, with a total rise of 60 inches, dividing by 7.5 inches (60 / 7.5) yields 8 risers.

817 views27
stairbuilding

75K subscribers

View Channel

FAQs

What is the most critical tool for ensuring accurate stair stringer layout?

The framing square, especially when used with stair gauges, is indispensable for consistently marking the rise and run on the stringer. A construction calculator is also highly recommended to minimize mathematical errors and ensure precise measurements.

How important is accuracy when marking a stair stringer, and what are the safety implications?

Accuracy is paramount for safety; even small errors can lead to uneven steps, creating a significant tripping hazard. Double-check all measurements and markings before cutting, as consistent riser heights and tread depths are crucial to prevent falls.

Can I use different materials for stair stringers, or is pressure-treated pine always necessary?

While pressure-treated pine is excellent for outdoor use or areas prone to moisture, untreated lumber like Douglas fir or Southern Yellow Pine can be used for indoor stairs. Always select straight, knot-free lumber of appropriate dimensions that meets local building codes for structural integrity.

What's a common mistake beginners make when laying out stringers, and how can I avoid it?

A frequent error is forgetting to account for the thickness of the treads and the necessary bottom cut for the finished floor. Ensure you deduct the tread thickness from the bottom riser and factor in the nosing overhang for consistent steps from top to bottom.

Transcript
Hide

deck is 60 in off the ground. Step two, determine your riser count. Next, you need to figure out how many steps you need. Standard building codes often suggest a maximum step height or unit rise of about 7.75 in. A comfortable height is usually around 7.5 in. Take your total rise 60 in, and divide it by 7.5. 60 / 7.5 equals 8. This means you need eight risers total. Step three, the minus one rule. This is the part that

Auto-generated transcript. May contain errors.