Skip to main content

Calculate Individual Riser Height & Tread Depth — Calculate Riser and Tread Dimensions

Beginner4 hours

Part of project

How to Lay Out a Stair Stringer with a Framing Square · Step 3 of 6

Helpful?

In this video

Using the total calculated rise of 119 3/8 inches, divide this by the total number of risers (16). This calculation yields an individual riser height of 7 7/16 inches. This ensures all risers are equal in height, which is essential for safety and craftsmanship. Simultaneously, determine the desired tread depth (run). A standard tread depth of 10 inches is chosen for this staircase. These two dimensions (7 7/16" rise and 10" tread) will be used to mark the stringers.

17.0K views813
stairbuilding

75K subscribers

View Channel

FAQs

What is the most critical tool for ensuring accurate stair stringer layout?

The framing square, especially when used with stair gauges, is indispensable for consistently marking the rise and run on the stringer. A construction calculator is also highly recommended to minimize mathematical errors and ensure precise measurements.

How important is accuracy when marking a stair stringer, and what are the safety implications?

Accuracy is paramount for safety; even small errors can lead to uneven steps, creating a significant tripping hazard. Double-check all measurements and markings before cutting, as consistent riser heights and tread depths are crucial to prevent falls.

Can I use different materials for stair stringers, or is pressure-treated pine always necessary?

While pressure-treated pine is excellent for outdoor use or areas prone to moisture, untreated lumber like Douglas fir or Southern Yellow Pine can be used for indoor stairs. Always select straight, knot-free lumber of appropriate dimensions that meets local building codes for structural integrity.

What's a common mistake beginners make when laying out stringers, and how can I avoid it?

A frequent error is forgetting to account for the thickness of the treads and the necessary bottom cut for the finished floor. Ensure you deduct the tread thickness from the bottom riser and factor in the nosing overhang for consistent steps from top to bottom.

Transcript
Hide

And that is from the top of the floor down to here. So, we're going to divide that by 16. I think it was 119. Yeah. 119 and 38. Always double check yourself twice. So 119 and 3/8 divided by 16 is a 7 and 7/16 riser riser. And we're going to go with a 10-in tread. I have to figure out where my two landings are. So if I look at this guy

Auto-generated transcript. May contain errors.