Skip to main content

Measure Total Rise — Determine Total Rise and Run

Beginner4 hours

Part of project

How to Lay Out a Stair Stringer with a Framing Square · Step 1 of 6

Helpful?

In this video

Begin by accurately measuring the total vertical rise that the staircase needs to cover. This measurement should be taken from the top of the finished lower floor to the top of the finished upper floor. If the finished flooring on the upper level is not yet installed, measure to the top of the subfloor and add the anticipated thickness of the finished flooring (e.g., 2 inches as mentioned in the video for future boards). This overall height is crucial for calculating consistent step dimensions.

8.6K views496
stairbuilding

75K subscribers

View Channel

FAQs

What is the most critical tool for ensuring accurate stair stringer layout?

The framing square, especially when used with stair gauges, is indispensable for consistently marking the rise and run on the stringer. A construction calculator is also highly recommended to minimize mathematical errors and ensure precise measurements.

How important is accuracy when marking a stair stringer, and what are the safety implications?

Accuracy is paramount for safety; even small errors can lead to uneven steps, creating a significant tripping hazard. Double-check all measurements and markings before cutting, as consistent riser heights and tread depths are crucial to prevent falls.

Can I use different materials for stair stringers, or is pressure-treated pine always necessary?

While pressure-treated pine is excellent for outdoor use or areas prone to moisture, untreated lumber like Douglas fir or Southern Yellow Pine can be used for indoor stairs. Always select straight, knot-free lumber of appropriate dimensions that meets local building codes for structural integrity.

What's a common mistake beginners make when laying out stringers, and how can I avoid it?

A frequent error is forgetting to account for the thickness of the treads and the necessary bottom cut for the finished floor. Ensure you deduct the tread thickness from the bottom riser and factor in the nosing overhang for consistent steps from top to bottom.

Transcript
Hide

stairs the first step is to measure from a finished surface to a finished surface so if you didn't have that flooring up there yet you would just measure from the finished surface to what the finished surface will be in the future those boards are 2 in thick so you would add 2 in to the joist hangers finish surface to finish surface in this case it's 85.5 in

Auto-generated transcript. May contain errors.