Skip to main content

Calculate Number of Risers and Treads

Beginner4 hours

Part of project

How to Lay Out a Stair Stringer with a Framing Square · Step 2 of 6

Helpful?

In this video

Measure the total vertical distance (total rise) from the top of the lower floor (where the stairs begin) to the top of the upper floor (where the stairs end). For instance, if the measurement is 8 feet 9 inches (105 inches). Then, divide the total rise (in inches) by a desired individual riser height (e.g., 7 or 7.5 inches, common building code standards) to determine the number of risers. For example, 105 inches / 7.5 inches = 14 risers. Remember that the number of treads will be one less than the number of risers.

2.8K views28
stairbuilding

75K subscribers

View Channel

FAQs

What is the most critical tool for ensuring accurate stair stringer layout?

The framing square, especially when used with stair gauges, is indispensable for consistently marking the rise and run on the stringer. A construction calculator is also highly recommended to minimize mathematical errors and ensure precise measurements.

How important is accuracy when marking a stair stringer, and what are the safety implications?

Accuracy is paramount for safety; even small errors can lead to uneven steps, creating a significant tripping hazard. Double-check all measurements and markings before cutting, as consistent riser heights and tread depths are crucial to prevent falls.

Can I use different materials for stair stringers, or is pressure-treated pine always necessary?

While pressure-treated pine is excellent for outdoor use or areas prone to moisture, untreated lumber like Douglas fir or Southern Yellow Pine can be used for indoor stairs. Always select straight, knot-free lumber of appropriate dimensions that meets local building codes for structural integrity.

What's a common mistake beginners make when laying out stringers, and how can I avoid it?

A frequent error is forgetting to account for the thickness of the treads and the necessary bottom cut for the finished floor. Ensure you deduct the tread thickness from the bottom riser and factor in the nosing overhang for consistent steps from top to bottom.

Transcript
Hide

you drew on the floor so let's go ahead and head to the back here where you can see the larger measurement here just don't forget that the 11 and 3/4 isn't going to represent the front of the nosing on the last step that's still going to be 10 in so if we go up to the top with our level we're going to Plum up to the top and measure off of the face of the wall we're going to be adding 3/4 of an inch for the thickness of our Riser and 1 in for the depth of the stair noosing and that will look something like this so again if I was going to grab my level and Plum down from the face of this step here the last step on the stairway or I could start from the bottom with my level and Plum up to where I can see where the first step is going to start from the top and hopefully this makes sense now another tool that you might need will be to figure out the length of the stairway where the stairway is going to basically start and where it is going to stop so in order order to do that the first thing we're going to need to do will be to measure the total rise the overall distance between the top of the upper level and the top of the bottom level and in our example we're going to have 8 9 in or 105 in and I do have other videos on this at our website go to the stairs link and then look for basic stair building video however I will provide you with a shortcut to that if this makes sense to you because the first thing we need to figure out is how many steps we're actually going to have in the stairway and we're not going to be able to do that without this number and then creating an individual stair riser height so to do that what I'm going to do is enter 105 into the calculator which would represent this measurement in inches and then I'm going to divide that by six 7 and if I wanted to have a 7-in riser then I would have 15 individual 7-in risers however since most building codes allow us to have a 7 and 3/4 in Riser I'm going to try dividing this by 7.5 and that brings us to 14 risers and keep in mind that this particular stairway was designed specifically for 7 and 1/2 in risers and 14 risers with 13 steps now let's go ahead and pretend that this stairway here was 107 in and I divided 7.5 into that and it came up with this number here then all I would need to do would be to divide either 14 or 15 into 107 so let's go ahead and do that so 107 divided by 14 equals about a 7 and 5/8 in Riser height and hopefully that makes sense if it doesn't again go to the website and…

Auto-generated transcript. May contain errors.