Skip to main content

Evaluate Sprinkler Head Coverage and Operation — Test and Adjust Coverage

Beginner4 hours

Part of project

Irrigation System Repair · Step 10 of 10

Helpful?

In this video

The video highlights ensuring 'all your sprinkler heads are getting the correct coverage.' Systematically observe each sprinkler head while its zone is active. Check for proper spray patterns (full circle, half circle, etc.), adequate water pressure, and consistent water distribution. Look for common issues such as clogged nozzles, broken or leaking heads, heads that are too low or high, or misaligned spray patterns that water pavements or non-landscape areas. Adjust or replace faulty heads to ensure even and efficient watering.

557 views11
The Handyman

532K subscribers

View Channel

FAQs

What specialized tools are essential for irrigation system repair beyond general household tools?

You'll definitely need a good shovel for digging, especially around pipes without damaging them. A hook and pick set is invaluable for cleaning stubborn sprinkler nozzles, and an adjustable wrench will help with various fittings. Don't forget PVC primer and cement for pipe repairs, and Teflon tape for threaded connections.

My sprinkler zone isn't turning on at all. Where should I start troubleshooting?

First, verify the zone is programmed correctly on your controller and that the master valve (if you have one) is open. Then, locate the valve for the non-working zone. Manually turn the solenoid a quarter turn counter-clockwise or flip its lever to see if the sprinklers activate, which helps isolate if the issue is electrical or mechanical within the valve itself.

How can I pinpoint an underground leak without excavating my entire lawn?

Look for unusually wet or overly green spots in your yard, or areas where the grass is unusually lush. You can also listen for hissing sounds near the main line or check your water meter for continuous movement even when all water sources are off, indicating a constant flow.

What are the most important safety precautions to take when digging for underground irrigation repairs?

Always call 811 (or your local 'dig safe' number) a few days before you dig to have underground utility lines marked. Wear sturdy gloves to protect your hands from debris and tools. Dig carefully and by hand when you get close to pipes or marked lines to avoid damaging them or other utilities.

Transcript
Hide

are you worried about your sprinklers at your house here in Phoenix our temperatures just get so hot here in the summer and it's always good just go through your system and make sure the timer is working properly set correctly making sure that the valves are operating properly all your sprinkler heads are getting the correct coverage this is something that we offer here at AMS Landscaping all you do is reach out to us on our website at aon.com and we come through and can do a complete audit of your system make recommendations and

Auto-generated transcript. May contain errors.