Skip to main content

Identify and Fix Broken Sprinkler Heads — Inspect and Clean Sprinkler Heads

Beginner4 hours

Part of project

Irrigation System Repair · Step 3 of 10

Helpful?

In this video

To begin, manually activate your irrigation system zone by zone. As each zone runs, walk around your property to observe the sprinkler heads. Look for any heads that are shooting water straight up into the air, indicating a broken riser, or those that are not throwing water as they should. Pay particular attention to areas alongside sidewalks, driveways, or roads, as these are common locations for sprinkler head damage due to vehicles or landscaping equipment. Identifying these issues early helps prevent water waste and ensures adequate coverage for your lawn.

12.5K views72
The Handyman

532K subscribers

View Channel

FAQs

What specialized tools are essential for irrigation system repair beyond general household tools?

You'll definitely need a good shovel for digging, especially around pipes without damaging them. A hook and pick set is invaluable for cleaning stubborn sprinkler nozzles, and an adjustable wrench will help with various fittings. Don't forget PVC primer and cement for pipe repairs, and Teflon tape for threaded connections.

My sprinkler zone isn't turning on at all. Where should I start troubleshooting?

First, verify the zone is programmed correctly on your controller and that the master valve (if you have one) is open. Then, locate the valve for the non-working zone. Manually turn the solenoid a quarter turn counter-clockwise or flip its lever to see if the sprinklers activate, which helps isolate if the issue is electrical or mechanical within the valve itself.

How can I pinpoint an underground leak without excavating my entire lawn?

Look for unusually wet or overly green spots in your yard, or areas where the grass is unusually lush. You can also listen for hissing sounds near the main line or check your water meter for continuous movement even when all water sources are off, indicating a constant flow.

What are the most important safety precautions to take when digging for underground irrigation repairs?

Always call 811 (or your local 'dig safe' number) a few days before you dig to have underground utility lines marked. Wear sturdy gloves to protect your hands from debris and tools. Dig carefully and by hand when you get close to pipes or marked lines to avoid damaging them or other utilities.

Transcript
Hide

maintenance is important year round first let's start by looking for any broken or misdirected sprinkler heads to do this turn on your system manually to test run each Zone with your system running walk around your house and observe each Zone look for areas where water is shooting up into the air or where the head doesn't appear to be throwing water as it should this is an indication of a broken sprinkler head and broken heads are not only wasteful but they can cause areas of your lawn to receive too too much or too little water pay special attention along sidewalks or driveway as damage is more likely to occur in these areas from vehicles or landscaping equipment fixing your broken sprinkler head is quick and easy you can either contact your irrigation contractor about the problem or you can fix it yourself and if you choose to fix it yourself be sure to check the specifications on the old head you are replacing prior to purchasing your new

Auto-generated transcript. May contain errors.