Skip to main content

Troubleshooting a Zone that Won't Turn On - Controller Power Check — Check the Controller and Valves

Beginner4 hours

Part of project

Irrigation System Repair · Step 2 of 10

Helpful?

In this video

If a sprinkler zone refuses to turn on, the issue could stem from several components: the power supply to the controller, the controller itself, the wiring connecting the controller to the valve, or the valve itself. The initial step for troubleshooting this is to check the sprinkler controller. Observe if the LCD screen is on. If it's not illuminated, the controller might not be receiving adequate power, even if it appears to be functioning on a backup battery.

236.8K views2.6K
The Handyman

532K subscribers

View Channel

FAQs

What specialized tools are essential for irrigation system repair beyond general household tools?

You'll definitely need a good shovel for digging, especially around pipes without damaging them. A hook and pick set is invaluable for cleaning stubborn sprinkler nozzles, and an adjustable wrench will help with various fittings. Don't forget PVC primer and cement for pipe repairs, and Teflon tape for threaded connections.

My sprinkler zone isn't turning on at all. Where should I start troubleshooting?

First, verify the zone is programmed correctly on your controller and that the master valve (if you have one) is open. Then, locate the valve for the non-working zone. Manually turn the solenoid a quarter turn counter-clockwise or flip its lever to see if the sprinklers activate, which helps isolate if the issue is electrical or mechanical within the valve itself.

How can I pinpoint an underground leak without excavating my entire lawn?

Look for unusually wet or overly green spots in your yard, or areas where the grass is unusually lush. You can also listen for hissing sounds near the main line or check your water meter for continuous movement even when all water sources are off, indicating a constant flow.

What are the most important safety precautions to take when digging for underground irrigation repairs?

Always call 811 (or your local 'dig safe' number) a few days before you dig to have underground utility lines marked. Wear sturdy gloves to protect your hands from debris and tools. Dig carefully and by hand when you get close to pipes or marked lines to avoid damaging them or other utilities.

Transcript
Hide

now we'll cover the most difficult problem to diagnose problem three a zone won't come on so this could be a problem with the power to the controller the controller itself the wiring between the controller and the valve or the valve itself a start troubleshooting first is your controller getting power is the LCD screen on if it's not you may not be getting power to your controller even if the LCD is on it may be running on a backup battery so it still may not be

Auto-generated transcript. May contain errors.