Skip to main content

Examine Irrigation Valves — Locate and Inspect Valves

Beginner4 hours

Part of project

Irrigation System Repair · Step 5 of 10

Helpful?

In this video

Locate and inspect the irrigation valves, which are typically housed in underground valve boxes. Once you've opened the valve box, examine the wiring connections to ensure that waterproof splices have been used. This is crucial for preventing electrical issues and ensuring system reliability. Also, check for any standing water within the valve box. Standing water often indicates a leak from the valve itself or a surrounding pipe, which needs to be addressed promptly.

70.6K views320
The Handyman

532K subscribers

View Channel

FAQs

What specialized tools are essential for irrigation system repair beyond general household tools?

You'll definitely need a good shovel for digging, especially around pipes without damaging them. A hook and pick set is invaluable for cleaning stubborn sprinkler nozzles, and an adjustable wrench will help with various fittings. Don't forget PVC primer and cement for pipe repairs, and Teflon tape for threaded connections.

My sprinkler zone isn't turning on at all. Where should I start troubleshooting?

First, verify the zone is programmed correctly on your controller and that the master valve (if you have one) is open. Then, locate the valve for the non-working zone. Manually turn the solenoid a quarter turn counter-clockwise or flip its lever to see if the sprinklers activate, which helps isolate if the issue is electrical or mechanical within the valve itself.

How can I pinpoint an underground leak without excavating my entire lawn?

Look for unusually wet or overly green spots in your yard, or areas where the grass is unusually lush. You can also listen for hissing sounds near the main line or check your water meter for continuous movement even when all water sources are off, indicating a constant flow.

What are the most important safety precautions to take when digging for underground irrigation repairs?

Always call 811 (or your local 'dig safe' number) a few days before you dig to have underground utility lines marked. Wear sturdy gloves to protect your hands from debris and tools. Dig carefully and by hand when you get close to pipes or marked lines to avoid damaging them or other utilities.

Transcript
Hide

inspection and then I'll determine exactly what needs to be done with any problems that I find when inspecting the valves the main thing I want to know is the valve's location but once I get to the valve I want to look at the wires make sure that waterproof splices have been used and then I want to see if there's any uh standing water in the valve box standing water obviously is an indication of a problem that will need to be addressed later there's some other considerations you need to think about when you inspect the drip system first

Auto-generated transcript. May contain errors.