Skip to main content

Identify and Address System Leaks — Identify the Problem Area

Beginner4 hours

Part of project

Irrigation System Repair · Step 1 of 10

Helpful?

In this video

After inspecting and adjusting sprinkler heads, carefully check your entire irrigation system for leaks. Leaks can be indicated by soft, wet patches that form in your lawn during or after an irrigation event, or even when the system is off. Conversely, dry spots in your lawn can also signal a nearby leak that is diverting water from that area. Common outdoor leaks include loose seals on sprinkler heads, leaky faucet connections, and broken hose lines. If you notice areas of low water pressure or significant water buildup that suggest an underground leak, it is advisable to contact a professional irrigation contractor for further investigation and repairs.

12.5K views72
The Handyman

532K subscribers

View Channel

FAQs

What specialized tools are essential for irrigation system repair beyond general household tools?

You'll definitely need a good shovel for digging, especially around pipes without damaging them. A hook and pick set is invaluable for cleaning stubborn sprinkler nozzles, and an adjustable wrench will help with various fittings. Don't forget PVC primer and cement for pipe repairs, and Teflon tape for threaded connections.

My sprinkler zone isn't turning on at all. Where should I start troubleshooting?

First, verify the zone is programmed correctly on your controller and that the master valve (if you have one) is open. Then, locate the valve for the non-working zone. Manually turn the solenoid a quarter turn counter-clockwise or flip its lever to see if the sprinklers activate, which helps isolate if the issue is electrical or mechanical within the valve itself.

How can I pinpoint an underground leak without excavating my entire lawn?

Look for unusually wet or overly green spots in your yard, or areas where the grass is unusually lush. You can also listen for hissing sounds near the main line or check your water meter for continuous movement even when all water sources are off, indicating a constant flow.

What are the most important safety precautions to take when digging for underground irrigation repairs?

Always call 811 (or your local 'dig safe' number) a few days before you dig to have underground utility lines marked. Wear sturdy gloves to protect your hands from debris and tools. Dig carefully and by hand when you get close to pipes or marked lines to avoid damaging them or other utilities.

Transcript
Hide

you can simply turn it back in the right direction lastly it's also important to check for leaks leaks can be indicated by soft wet patches that form during an irrigation event or when you test your irrigation system a dry spot can also indicate a nearby leak that's preventing preventing that area from receiving sufficient water some common outdoor leaks to look out for are loose seals on the sprinkler head that cause water to drip out and pool at the base of the sprinkler head leaky faucet connections that cause excess water to drip out or broken hose lines that emit small leaks another outdoor leak is an underground leak which can be indicated by areas of low water pressure or buildup of water if you think you have an underground leak contact your contractor about the problem so that they can investigate skate further and make any repairs if needed in addition to checking for leaks and broken sprinkler heads it's also important to make seasonal adjustments to your system to account for changes in

Auto-generated transcript. May contain errors.