Skip to main content
Stesso
BrowseFeedExpertsMy ProjectsStesso Hubfor creatorsfor businessStesso Hub
Stesso
Hub

Step 1 · Identify the Problem Area

Begin by observing the entire irrigation system during operation. Look for visible water leaks around pipes and sprinkler heads. Note any sprinkler heads that are not popping up, are broken, or are spraying water in the wrong direction. Also, identify any areas of the lawn that are not receiving adequate water, indicating a potential clog or coverage issue. If you have an irrigation controller, check for error codes or warnings.

Stesso home
SearchSearchBrowseBrowseFeedFeedMy ProjectsMy Projects
Log inLog inSign upSign up

Step 1 · Identify the Problem Area

Begin by observing the entire irrigation system during operation. Look for visible water leaks around pipes and sprinkler heads. Note any sprinkler heads that are not popping up, are broken, or are spraying water in the wrong direction. Also, identify any areas of the lawn that are not receiving adequate water, indicating a potential clog or coverage issue. If you have an irrigation controller, check for error codes or warnings.

Videos for this step

Identify and Address System LeaksTest and Diagnose Sprinkler ZonesInspect for Physical Damage

Tools and Materials

← Project

Irrigation System Repair

Step 1 of 10·6.1 hr left

1
Identify the Problem Area
30 minutes3 items
2
Check the Controller and Valves
20 minutes2 items
3
Inspect and Clean Sprinkler Heads
25 minutes3 items
4
Test Sprinkler Head Functionality
15 minutes2 items
5
Locate and Inspect Valves
30 minutes3 items
6
Repair or Replace Faulty Valves
60 minutes4 items
7
Check for Underground Leaks
45 minutes2 items
8
Repair Underground Pipe Leaks
90 minutes5 items
9
Flush the System
20 minutes1 items
10
Test and Adjust Coverage
30 minutes2 items
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.