Skip to main content
Stesso
BrowseFeedExpertsMy ProjectsStesso Hubfor creatorsfor businessStesso Hub
Stesso
Hub

Step 10 · Test and Adjust Coverage

Once all repairs are made and the system has been flushed, run the irrigation system through a full watering cycle. Observe the water coverage across all zones. Check for any dry spots or over-watered areas. Adjust sprinkler head nozzles, rotation patterns, and spray distances as needed to achieve uniform coverage. Ensure that sprinklers are not spraying directly onto hard surfaces like driveways or sidewalks.

Stesso home
SearchSearchBrowseBrowseFeedFeedMy ProjectsMy Projects
Log inLog inSign upSign up

Step 10 · Test and Adjust Coverage

Once all repairs are made and the system has been flushed, run the irrigation system through a full watering cycle. Observe the water coverage across all zones. Check for any dry spots or over-watered areas. Adjust sprinkler head nozzles, rotation patterns, and spray distances as needed to achieve uniform coverage. Ensure that sprinklers are not spraying directly onto hard surfaces like driveways or sidewalks.

Videos for this step

Test and Fine-Tune Sprinkler PerformanceSystem Test & AdjustmentEvaluate Sprinkler Head Coverage and Operation

Tools and Materials

← Project

Irrigation System Repair

Step 10 of 10·30 min left

Identify the Problem Area
30 minutes3 items
Check the Controller and Valves
20 minutes2 items
Inspect and Clean Sprinkler Heads
25 minutes3 items
Test Sprinkler Head Functionality
15 minutes2 items
Locate and Inspect Valves
30 minutes3 items
Repair or Replace Faulty Valves
60 minutes4 items
Check for Underground Leaks
45 minutes2 items
Repair Underground Pipe Leaks
90 minutes5 items
Flush the System
20 minutes1 items
10
Test and Adjust Coverage
30 minutes2 items
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.