Skip to main content
Stesso
BrowseFeedExpertsMy ProjectsStesso Hubfor creatorsfor businessStesso Hub
Stesso
Hub

Step 6 · Repair or Replace Faulty Valves

If a valve is leaking externally, attempt to tighten the bonnet nut. If the leak persists or if the valve is not opening/closing properly, shut off the water supply to the irrigation system. Carefully disconnect the pipes from the valve. Disassemble the valve, inspect the diaphragm for tears or debris, and clean or replace it if necessary. If the valve body is cracked or severely corroded, replace the entire valve assembly. Reconnect the pipes securely after repair or replacement.

Stesso home
SearchSearchBrowseBrowseFeedFeedMy ProjectsMy Projects
Log inLog inSign upSign up

Step 6 · Repair or Replace Faulty Valves

If a valve is leaking externally, attempt to tighten the bonnet nut. If the leak persists or if the valve is not opening/closing properly, shut off the water supply to the irrigation system. Carefully disconnect the pipes from the valve. Disassemble the valve, inspect the diaphragm for tears or debris, and clean or replace it if necessary. If the valve body is cracked or severely corroded, replace the entire valve assembly. Reconnect the pipes securely after repair or replacement.

Videos for this step

Identify and Repair Leaking Sprinkler Control ValvesDiagnose and Rebuild Irrigation Control ValveDisassemble and Clean Leaking Valve

Tools and Materials

← Project

Irrigation System Repair

Step 6 of 10·4.1 hr left

Identify the Problem Area
30 minutes3 items
Check the Controller and Valves
20 minutes2 items
Inspect and Clean Sprinkler Heads
25 minutes3 items
Test Sprinkler Head Functionality
15 minutes2 items
Locate and Inspect Valves
30 minutes3 items
6
Repair or Replace Faulty Valves
60 minutes4 items
7
Check for Underground Leaks
45 minutes2 items
8
Repair Underground Pipe Leaks
90 minutes5 items
9
Flush the System
20 minutes1 items
10
Test and Adjust Coverage
30 minutes2 items
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.