Skip to main content
Stesso
BrowseFeedExpertsMy ProjectsStesso Hubfor creatorsfor businessStesso Hub
Stesso
Hub

Step 7 · Check for Underground Leaks

If the problem is not resolved by checking heads and valves, suspect an underground pipe leak. Turn on the system for a specific zone and walk the path of the buried pipes. Look for areas where water is pooling on the surface, especially in locations where there shouldn't be any standing water. Unusually lush or saturated patches of lawn can also indicate a leak. If a leak is suspected, you may need to carefully excavate the area to expose the pipe.

Stesso home
SearchSearchBrowseBrowseFeedFeedMy ProjectsMy Projects
Log inLog inSign upSign up

Step 7 · Check for Underground Leaks

If the problem is not resolved by checking heads and valves, suspect an underground pipe leak. Turn on the system for a specific zone and walk the path of the buried pipes. Look for areas where water is pooling on the surface, especially in locations where there shouldn't be any standing water. Unusually lush or saturated patches of lawn can also indicate a leak. If a leak is suspected, you may need to carefully excavate the area to expose the pipe.

Videos for this step

Identify and Expose Leaking Sprinkler HeadLocate the LeakActivate Sprinkler Zones and Visually Inspect for Leaks

Tools and Materials

← Project

Irrigation System Repair

Step 7 of 10·3.1 hr left

Identify the Problem Area
30 minutes3 items
Check the Controller and Valves
20 minutes2 items
Inspect and Clean Sprinkler Heads
25 minutes3 items
Test Sprinkler Head Functionality
15 minutes2 items
Locate and Inspect Valves
30 minutes3 items
Repair or Replace Faulty Valves
60 minutes4 items
7
Check for Underground Leaks
45 minutes2 items
8
Repair Underground Pipe Leaks
90 minutes5 items
9
Flush the System
20 minutes1 items
10
Test and Adjust Coverage
30 minutes2 items
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.