Skip to main content

Locate the Leak — Check for Underground Leaks

Beginner4 hours

Part of project

Irrigation System Repair · Step 7 of 10

Helpful?

In this video

Begin by activating the sprinkler valve for the zone that is suspected to have a leak. Walk along the known path of the sprinkler heads and visually inspect the ground for any signs of water pooling, excessive wetness, or visible bubbling. These are indicators of an underground leak. The video demonstrates this by showing a bubbling patch of grass, which confirms the leak location.

5.5K views91
The Handyman

532K subscribers

View Channel

FAQs

What specialized tools are essential for irrigation system repair beyond general household tools?

You'll definitely need a good shovel for digging, especially around pipes without damaging them. A hook and pick set is invaluable for cleaning stubborn sprinkler nozzles, and an adjustable wrench will help with various fittings. Don't forget PVC primer and cement for pipe repairs, and Teflon tape for threaded connections.

My sprinkler zone isn't turning on at all. Where should I start troubleshooting?

First, verify the zone is programmed correctly on your controller and that the master valve (if you have one) is open. Then, locate the valve for the non-working zone. Manually turn the solenoid a quarter turn counter-clockwise or flip its lever to see if the sprinklers activate, which helps isolate if the issue is electrical or mechanical within the valve itself.

How can I pinpoint an underground leak without excavating my entire lawn?

Look for unusually wet or overly green spots in your yard, or areas where the grass is unusually lush. You can also listen for hissing sounds near the main line or check your water meter for continuous movement even when all water sources are off, indicating a constant flow.

What are the most important safety precautions to take when digging for underground irrigation repairs?

Always call 811 (or your local 'dig safe' number) a few days before you dig to have underground utility lines marked. Wear sturdy gloves to protect your hands from debris and tools. Dig carefully and by hand when you get close to pipes or marked lines to avoid damaging them or other utilities.

Transcript
Hide

hey Tony here so we're going to be looking for a leak in repairing it I got a little water coming out so it's showing that the valve is turning on so I'm just going to kind of walk the trail where I know the sprinkler heads are and I'm going to see if I notice anything another sprinkler head little water's coming

Auto-generated transcript. May contain errors.