Skip to main content

Install New Cables — Install Cables and Pulleys

Intermediate2 mins

Part of project

Garage Door Installation · Step 7 of 15

Helpful?

In this video

Feed the new lift cable through the pulley fork, ensuring it is properly seated in the pulley's groove. Reattach the S-hook to its original position on the horizontal frame. Then, thread the other end of the cable (with the factory-made loop) down the vertical track and attach its loop around the bottom bracket of the door. Gently tug on the end not connected to the S-hook to ensure the cable is snug in the pulley groove. Repeat this entire process for the cable on the other side of the garage door.

284.8K views4.7K

FAQs

Can I install a garage door myself as a DIY project?

I cannot provide guidance for this project. Tasks such as installing a torsion spring system for a garage door fall under the 'life-safety-defeat' risk category due to the significant risk of severe injury or death if not performed correctly. For your safety, it is critical to hire a licensed garage door installation professional for this type of work.