Skip to main content

Wind the Torsion Spring

Intermediate2 mins

Part of project

Garage Door Installation · Step 8 of 15

Helpful?

In this video

Insert one proper winding bar into a hole on the spring's winding cone. Use the other winding bar to lever the spring upwards, applying tension by rotating the cone one quarter turn at a time. After each quarter turn, insert the first bar into the next available hole to maintain tension and switch the second bar to continue winding. Count each quarter turn carefully until you reach the calculated total (e.g., 34 turns for an 8-foot door). Ensure the winding bars are fully seated in the winding cone holes during this process to prevent slippage.

106.1K views2.1K

FAQs

Can I install a garage door myself as a DIY project?

I cannot provide guidance for this project. Tasks such as installing a torsion spring system for a garage door fall under the 'life-safety-defeat' risk category due to the significant risk of severe injury or death if not performed correctly. For your safety, it is critical to hire a licensed garage door installation professional for this type of work.