Skip to main content

Prepare the Door Opening — Inspect Existing Door Frame and Opening

Intermediate2 mins

Part of project

Garage Door Installation · Step 1 of 15

Helpful?

In this video

Begin by thoroughly cleaning the floor area surrounding the door opening to ensure a clear workspace. Double-check the rough opening dimensions to confirm they are suitable for the new door. The rough opening should typically be approximately 1/2 inch taller and 3/4 inch wider than the overall outside dimensions of the new door frame. Use a level to ensure the floor is perfectly level and also check the rough opening itself for plumb (vertically straight) and square (all corners at 90 degrees).

88.2K views

FAQs

Can I install a garage door myself as a DIY project?

I cannot provide guidance for this project. Tasks such as installing a torsion spring system for a garage door fall under the 'life-safety-defeat' risk category due to the significant risk of severe injury or death if not performed correctly. For your safety, it is critical to hire a licensed garage door installation professional for this type of work.