Skip to main content

Install Skirt Boards — Install the Skirt Board

Beginner4 hours

Part of project

How to Scribe and Cut a Stair Skirt Board to Fit · Step 5 of 5

Helpful?

In this video

The previously prepared skirt boards, now accurately cut based on the templates and scribe lines, are installed. Construction adhesive is applied to the back of the skirt boards, and they are carefully positioned along the stringers. To ensure a tight fit and prevent gaps, screws are driven through the skirt board into the stringer, pulling it firmly against the wall. This technique, applied in sections where needed, helps compensate for any minor irregularities in the wall or stringer. This method is crucial for a clean, finished appearance, creating the illusion of a traditional lapped joint where the skirt board is seamlessly integrated with the treads.

162.8K views6.5K
Inside Carpentry

321K subscribers

View Channel

FAQs

What specific tools are essential for accurately scribing a stair skirt board?

The Bullet Tools Stair Step Scribe 2 is crucial for transferring the exact stair profile to your skirt board, ensuring a snug fit. A good quality pencil for marking and a reliable measuring tape are also indispensable for precise measurements. For cutting, a jigsaw will be your primary tool for intricate angles.

Is this project truly beginner-friendly, and can it be completed within the estimated 4 hours?

While rated beginner, patience and precision are key. The scribing and cutting steps require careful attention, and mistakes can be costly. For a first-timer, 4 hours might be tight, especially if you need to troubleshoot or make small adjustments. Allow for extra time, particularly for dry fitting and fine-tuning cuts.

What's the biggest mistake beginners make when cutting the skirt board, and how can it be avoided?

The most common mistake is cutting too much material, as you can't add it back. Always cut slightly outside your scribe line and then use a block plane or sandpaper to slowly shave down to the line for a perfect fit. Remember the adage, "Measure twice, cut once," and apply it rigorously to this project.

Can I use materials other than cellular PVC for the skirt board, and what are the pros and cons?

Yes, solid wood (like pine or oak) or MDF are common alternatives. Cellular PVC, like the Veranda trim suggested, offers excellent moisture resistance and stability, making it good for varying humidity. Wood can be stained to match existing trim but may be more prone to warping or shrinking if not properly acclimated before installation.

Transcript
Hide

we have like a frame for a structure now we're adding just the finished materials but most of the time it wasn't that way the whole thing it was just it was all finished it was all framed it was one thing i'm glad we're not doing that i'm glad too that takes a lot of work some people still do that i think and hey props to you yeah actually we got to do a whole nother set around the corner it's three o'clock now and i think we can do it we gotta muster up some encouragement here yeah go to your inner urbano with those so that ends another day and another week at the farmhouse

Auto-generated transcript. May contain errors.