Skip to main content

Layout Skirt Board Profile — Transfer Stair Profile to Skirt Board

Beginner4 hours

Part of project

How to Scribe and Cut a Stair Skirt Board to Fit · Step 2 of 5

Helpful?

In this video

Position the skirt board (which in this example is made of oriented strand board, OSB) against the stair stringer and steps. Use a framing square to transfer the exact profile of the stair treads and risers onto the skirt board. The video advises that for more detailed layout techniques, a previous video in the series is available, but demonstrates the basic process of using the square to mark the lines.

56.7K views562
Inside Carpentry

321K subscribers

View Channel

FAQs

What specific tools are essential for accurately scribing a stair skirt board?

The Bullet Tools Stair Step Scribe 2 is crucial for transferring the exact stair profile to your skirt board, ensuring a snug fit. A good quality pencil for marking and a reliable measuring tape are also indispensable for precise measurements. For cutting, a jigsaw will be your primary tool for intricate angles.

Is this project truly beginner-friendly, and can it be completed within the estimated 4 hours?

While rated beginner, patience and precision are key. The scribing and cutting steps require careful attention, and mistakes can be costly. For a first-timer, 4 hours might be tight, especially if you need to troubleshoot or make small adjustments. Allow for extra time, particularly for dry fitting and fine-tuning cuts.

What's the biggest mistake beginners make when cutting the skirt board, and how can it be avoided?

The most common mistake is cutting too much material, as you can't add it back. Always cut slightly outside your scribe line and then use a block plane or sandpaper to slowly shave down to the line for a perfect fit. Remember the adage, "Measure twice, cut once," and apply it rigorously to this project.

Can I use materials other than cellular PVC for the skirt board, and what are the pros and cons?

Yes, solid wood (like pine or oak) or MDF are common alternatives. Cellular PVC, like the Veranda trim suggested, offers excellent moisture resistance and stability, making it good for varying humidity. Wood can be stained to match existing trim but may be more prone to warping or shrinking if not properly acclimated before installation.

Transcript
Hide

numbers 1 in tall 1 in out and then let's go ahead and grab our skirt board and of course your skirtboard might not look like this and of course you can use a variety of different materials for skirtboard now this is the second video in this series I'm not going to go over all the details about laying out the marks I would suggest watching that video and I will put a link to that video in either the description area or the comment area and of course you can always just set a straight edge like the framing square on top of the steps and mark them and keep in mind that our stairway here is perfectly drawn there are no mistakes all of the steps and riser Heights are exactly the same however yours might not be that way so you're going to have to pay attention to that when laying out your steps because it's not going to do you a lot of good to draw a line from this step here if it's tilted a little bit if you're going to be dropping the skirt board down and using this line here for this step here however it might work just fine if you're going to be sliding this skirt board forward and using this line here for this step here and this isn't always going to be easy to lay out a piece of skirt board that is going to be extremely accurate however I will be providing details for how you can cover up all of your mistakes in future videos

Auto-generated transcript. May contain errors.