Skip to main content

Understand Stair Dimensions — Measure and Mark Riser Heights

Beginner4 hours

Part of project

How to Scribe and Cut a Stair Skirt Board to Fit · Step 1 of 5

Helpful?

In this video

The video begins by explaining the specific dimensions of the stair nosing and tread thickness, which are crucial for accurately marking and cutting the skirt board. In this example, the nosing overhang is 1 inch, and the tread thickness is also 1 inch. It is important to note that actual stair dimensions might vary and should be measured accurately.

56.7K views562
Inside Carpentry

321K subscribers

View Channel

FAQs

What specific tools are essential for accurately scribing a stair skirt board?

The Bullet Tools Stair Step Scribe 2 is crucial for transferring the exact stair profile to your skirt board, ensuring a snug fit. A good quality pencil for marking and a reliable measuring tape are also indispensable for precise measurements. For cutting, a jigsaw will be your primary tool for intricate angles.

Is this project truly beginner-friendly, and can it be completed within the estimated 4 hours?

While rated beginner, patience and precision are key. The scribing and cutting steps require careful attention, and mistakes can be costly. For a first-timer, 4 hours might be tight, especially if you need to troubleshoot or make small adjustments. Allow for extra time, particularly for dry fitting and fine-tuning cuts.

What's the biggest mistake beginners make when cutting the skirt board, and how can it be avoided?

The most common mistake is cutting too much material, as you can't add it back. Always cut slightly outside your scribe line and then use a block plane or sandpaper to slowly shave down to the line for a perfect fit. Remember the adage, "Measure twice, cut once," and apply it rigorously to this project.

Can I use materials other than cellular PVC for the skirt board, and what are the pros and cons?

Yes, solid wood (like pine or oak) or MDF are common alternatives. Cellular PVC, like the Veranda trim suggested, offers excellent moisture resistance and stability, making it good for varying humidity. Wood can be stained to match existing trim but may be more prone to warping or shrinking if not properly acclimated before installation.

Transcript
Hide

in this video I will be providing you with information on how you can install a skirtboard on a Stairway that has a nosing on the steps so that would be an overhang and in our example here it's going to be a 1 in overhang and the thickness of the tread is going to also be 1 in for making it as easy as possible on me so just remember those numbers 1 in tall 1 in out and then

Auto-generated transcript. May contain errors.