Solder Male Adapter to Pipe

What happens here

Attach the Bernzomatic TS4000 torch to the Harris MAP//Pro gas canister. Ignite the torch. Position the torch flame on one side of the copper pipe and male adapter joint. Simultaneously, place the lead-free solder wire on the opposite side of the joint. As the copper heats up and the flux starts to bubble and turn green, the solder will begin to melt and be drawn into the joint by capillary action. Move the torch around the pipe to ensure even heating, allowing the solder to flow completely around the joint. Once the solder has flowed, remove the torch and let the joint cool naturally. Immediately after soldering, wipe any excess solder and flux from the joint with a damp cloth or gloved hand to prevent corrosion and ensure a clean finish. The goal is to create a complete and even bead of solder around the entire circumference of the joint.

Goal: Heat the copper pipe and male adapter, then apply lead-free solder to create a strong, leak-proof joint.