Skip to main content

Remove Caliper and Brake Pads

0:13
2:26
315.5K views

At 0:13 in

Brake replacement

What happens here

After removing the wheel, visually inspect the outer brake pad through the caliper for its thickness. Then, using an appropriate-sized socket, remove the two slide pins that hold the brake caliper in place. Once the slide pins are out, carefully pull the brake caliper off the rotor. It's crucial not to let the caliper hang freely by its brake line, as this can damage the line. Instead, support it using a hook or by resting it on a nearby suspension component. Finally, remove the old brake pads from the caliper mounting bracket. Compare the inner and outer brake pads for uneven wear; significant differences might indicate a caliper issue.

Goal: Remove brake caliper and old brake pads

Tools and materials

  • Brake Caliper Hanger — Supporting the brake caliper to prevent damage to the brake line
  • Socket Wrench — Removing the slide pins

What they say

Hide

supports it. Remove the nuts from the wheel. Now, the pad that you can see right here only tells half the story. I'm going to start out by removing these slide pins. Pull the caliper. Don't just leave this hanging. That can put stress on your brake line. Pull your pads off. The outside can wear differently from the inside, and if that's the case, then you're going to need to do a little bit more investigating. But, these pads don't squeeze themselves. This piston applies force, and these slide pins let

Auto-generated from the video audio.