Skip to main content

Install New Rotor, Bracket, and Pads

1:23
2:26
315.5K views

At 1:23 in

Brake replacement

What happens here

First, install the new brake rotor onto the hub, ensuring it sits flush. Then, snap the new pad retention clips into place on the caliper mounting bracket. Re-mount the caliper mounting bracket onto the vehicle, securing it with its two bolts and tightening them to the manufacturer's specified torque. Insert the new brake pads into the retention clips on the caliper mounting bracket. Apply a small amount of brake grease to the contact points where the brake pads meet the clips and the caliper. This helps prevent squealing and ensures smooth pad movement.

Goal: Install new brake rotor, caliper mounting bracket, and brake pads

Tools and materials

  • Brake Grease — Lubricating pad contact points
  • Caliper Mounting Bracket — Holding the brake pads and caliper
  • New Brake Pads — Friction material for braking
  • New Brake Rotor — The new braking surface
  • New Pad Retention Clips — Securing brake pads in the bracket

What they say

Hide

install. Pop these clips off. You want to check these for rust and build-up, as well as check your slide pins. Pull the pin out and grease as needed. Once you got your new clips in, remount your caliper bracket. Put your brake pads in. I like to apply a small amount of grease. Get yourself a small C-clamp, compress your piston, and install your caliper. But, now what if you need to replace your caliper? Make sure you have the correct caliper with the bleeder on top so air can exit. You're going to

Auto-generated from the video audio.