Skip to main content

Prepare Vehicle and Remove Wheel

0:01
2:26
315.5K views

At 0:01 in

Brake replacement

What happens here

Before beginning any work, ensure the vehicle is safe. Place wheel chocks in front and behind the wheel diagonally opposite the one you are working on. Use a lug wrench to loosen the lug nuts on the wheel you intend to remove, but do not remove them completely yet. Then, use a hydraulic floor jack, such as a Daytona 3-ton model, to lift the vehicle until the wheel is off the ground. Once lifted, place a jack stand securely under the vehicle's frame as a safety measure. Remove the lug nuts completely using an impact driver and then carefully remove the wheel.

Goal: Safely prepare the vehicle and remove the wheel

Tools and materials

  • Hydraulic Floor Jack Daytona 3 Ton — Lifting the vehicle
  • Impact Driver Milwaukee — Quickly removing lug nuts
  • Jack Stands Daytona — Supporting the vehicle once lifted
  • Lug Wrench — Loosening and tightening lug nuts
  • Wheel Chocks — Preventing the vehicle from rolling

What they say

Hide

Doing your brakes? Here's what to check before replacing parts. Chock the wheel front and back. Loosen your lugs before lifting the vehicle, but keep the lug nuts on. The jack lifts it, the stand supports it. Remove the nuts from the wheel. Now, the pad that you can see right here only tells half the story. I'm going to start out by removing these slide pins. Pull the caliper. Don't just leave this hanging. That can put stress on your brake line. Pull your pads off.

Auto-generated from the video audio.