Skip to main content

Reinstall Wheel and Final Torquing

2:12
2:26
315.5K views

At 2:12 in

Brake replacement

What happens here

Carefully place the wheel back onto the hub, aligning the lug holes. Start all the lug nuts by hand to ensure they are properly threaded before tightening. Once all lug nuts are hand-tight, lower the vehicle by removing the jack stands and slowly lowering the hydraulic floor jack. With the vehicle's weight on the ground, use a torque wrench to tighten the lug nuts to the manufacturer's specified torque in a star pattern. This ensures even pressure and prevents the wheel from coming loose. After torquing the lug nuts, pump the brake pedal a few times to ensure a firm pedal feel before driving. Test the brakes at low speed in a safe area.

Goal: Reinstall the wheel and torque lug nuts to specification

Tools and materials

  • Hydraulic Floor Jack Daytona 3 Ton — Lowering the vehicle
  • Jack Stands Daytona — Removing from under the vehicle
  • Torque Wrench — Tightening lug nuts to precise specifications

What they say

Hide

Close it. Pump. Crack the bleeder. Make sure that it's solid. And don't let your reservoir run dry. Put your wheel on. Start your lug nuts by hand. Pull your stands. Lower the vehicle. Torque to spec in a star pattern. Anyways, I got the fronts to do. I'll catch you guys later. Peace.

Auto-generated from the video audio.