Skip to main content

Clear Impeller Debris — Check the Impeller

Beginner4 hours

Part of project

Sump Pump Repair · Step 3 of 5

Helpful?

In this video

Once the pump is out of the pit, inspect the impeller closely. A stick is found lodged inside the impeller, preventing it from spinning freely. Use a tool (or fingers if safe and feasible) to remove the debris. After removing the obstruction, manually spin the impeller to ensure it moves smoothly and freely.

1.5K views56

FAQs

What are the most critical safety precautions I should take before starting any sump pump repair?

Always disconnect power to the sump pump at its circuit breaker before touching anything. Water and electricity are a dangerous combination, so ensure your hands are dry and avoid standing in water. Wear rubber gloves and eye protection to prevent injury from debris or contaminated water.

Do I really need all the specialized tools listed, or can I get by with basic household tools?

While basic screwdrivers and pliers are useful, a voltage tester is essential for safely verifying power. Tools like a drum auger or pipe wrench are specifically designed for clearing stubborn clogs in the discharge line or safely handling pump connections. A drill pump can be invaluable for quickly bailing out water, making the job cleaner and faster.

My sump pump runs continuously; what's the most common cause of this, and how can I fix it?

A constantly running sump pump usually indicates a stuck float switch or a blockage in the discharge line. First, disconnect power and check the float switch for any debris or obstructions preventing it from falling. If the switch is clear, the discharge line might be clogged, requiring the use of a drain snake to clear it out.

The pump motor hums, but no water is being discharged. What should I check first?

If your sump pump motor hums but doesn't move water, the impeller is likely jammed with debris or damaged, or the discharge line is severely blocked. After disconnecting power, access the impeller area and carefully clear any obstructions. If the impeller is clear, then focus on clearing the discharge line with a drum auger.

Transcript
Hide

can see this is the line that runs out to the street. So there's water in this pipe. The check valve keeps the water from coming down in, but we're going to loosen up. Let's take a look. Okay, so you can see right here there's a stick stuck, a stick stuck inside the impeller. So let's pull that out of there. And there we go. And then let's spin that impeller. Oh yeah, nice and free. So now let's test it and see. We put, we'll go ahead

Auto-generated transcript. May contain errors.