Skip to main content

Test the Pump Motor and Impeller — Check the Impeller

Beginner4 hours

Part of project

Sump Pump Repair · Step 3 of 5

Helpful?

In this video

After exposing the impeller, observe it for any blockages. Manually turn the impeller to check if it moves freely. In this case, it was jammed with debris but now turns. To test the motor, plug the pump into an electrical outlet using an extension cord. Carefully lift the float switch to activate the pump. The motor should engage, and the impeller will start to spin. This confirms the motor is functional and the issue was likely a jam.

83.1K views746

FAQs

What are the most critical safety precautions I should take before starting any sump pump repair?

Always disconnect power to the sump pump at its circuit breaker before touching anything. Water and electricity are a dangerous combination, so ensure your hands are dry and avoid standing in water. Wear rubber gloves and eye protection to prevent injury from debris or contaminated water.

Do I really need all the specialized tools listed, or can I get by with basic household tools?

While basic screwdrivers and pliers are useful, a voltage tester is essential for safely verifying power. Tools like a drum auger or pipe wrench are specifically designed for clearing stubborn clogs in the discharge line or safely handling pump connections. A drill pump can be invaluable for quickly bailing out water, making the job cleaner and faster.

My sump pump runs continuously; what's the most common cause of this, and how can I fix it?

A constantly running sump pump usually indicates a stuck float switch or a blockage in the discharge line. First, disconnect power and check the float switch for any debris or obstructions preventing it from falling. If the switch is clear, the discharge line might be clogged, requiring the use of a drain snake to clear it out.

The pump motor hums, but no water is being discharged. What should I check first?

If your sump pump motor hums but doesn't move water, the impeller is likely jammed with debris or damaged, or the discharge line is severely blocked. After disconnecting power, access the impeller area and carefully clear any obstructions. If the impeller is clear, then focus on clearing the discharge line with a drum auger.

Transcript
Hide

but before we do that let's go ahead and just see if we can get this thing to kick on what I'm gonna do is plug the pump a sorry I'm gonna plug the pump in and I'm gonna kick on the switch oh did you see that see how it starts to try to move there it goes so what does that tell me

Auto-generated transcript. May contain errors.