Skip to main content

Diagnosing the Float Switch — Inspect the Float Switch

Beginner4 hours

Part of project

Sump Pump Repair · Step 2 of 5

Helpful?

In this video

To diagnose the issue, first observe the sump pit. Manually lift the tethered float to confirm that the switch clicks and the pump motor engages. This verifies the pump and switch are functional. Next, use a garden hose to fill the sump pit with water. Observe that as the water level rises, the float becomes submerged but does not rise high enough to change its angle and trigger the pump. This confirms the problem lies with the float's range of motion, likely due to the tether length or stiffness.

2.3K views21

FAQs

What are the most critical safety precautions I should take before starting any sump pump repair?

Always disconnect power to the sump pump at its circuit breaker before touching anything. Water and electricity are a dangerous combination, so ensure your hands are dry and avoid standing in water. Wear rubber gloves and eye protection to prevent injury from debris or contaminated water.

Do I really need all the specialized tools listed, or can I get by with basic household tools?

While basic screwdrivers and pliers are useful, a voltage tester is essential for safely verifying power. Tools like a drum auger or pipe wrench are specifically designed for clearing stubborn clogs in the discharge line or safely handling pump connections. A drill pump can be invaluable for quickly bailing out water, making the job cleaner and faster.

My sump pump runs continuously; what's the most common cause of this, and how can I fix it?

A constantly running sump pump usually indicates a stuck float switch or a blockage in the discharge line. First, disconnect power and check the float switch for any debris or obstructions preventing it from falling. If the switch is clear, the discharge line might be clogged, requiring the use of a drain snake to clear it out.

The pump motor hums, but no water is being discharged. What should I check first?

If your sump pump motor hums but doesn't move water, the impeller is likely jammed with debris or damaged, or the discharge line is severely blocked. After disconnecting power, access the impeller area and carefully clear any obstructions. If the impeller is clear, then focus on clearing the discharge line with a drum auger.

Transcript
Hide

Okay, so looking down on the Sump pole here, this is the float. And you'll see there's water down in here. And if I lift this, it clicks and triggers the pump. And then when I let it go, it shuts the pump off. So let's fill it up with water. So now you can see the float is now underwater. So it's not going to raise up any higher than that. So there's this little string here. And if you just give it just a little bit of a tug, it gives it enough to trigger the switch. So now on these, there isn't adjustment that you can

Auto-generated transcript. May contain errors.