Skip to main content

Inspect Exterior Discharge Pipe — Clear the Discharge Line

Beginner4 hours

Part of project

Sump Pump Repair · Step 4 of 5

Helpful?

In this video

The final check involves inspecting the exterior discharge pipe. Go outside your house and locate where the sump pump expels water. Check the pipe for any visible cracks, breaks, or blockages. Ensure the end of the pipe is not buried in dirt, covered by landscaping, or clogged with leaves or animal nests. A clear discharge path is essential for the pump to move water away from your foundation.

28.0K views59

FAQs

What are the most critical safety precautions I should take before starting any sump pump repair?

Always disconnect power to the sump pump at its circuit breaker before touching anything. Water and electricity are a dangerous combination, so ensure your hands are dry and avoid standing in water. Wear rubber gloves and eye protection to prevent injury from debris or contaminated water.

Do I really need all the specialized tools listed, or can I get by with basic household tools?

While basic screwdrivers and pliers are useful, a voltage tester is essential for safely verifying power. Tools like a drum auger or pipe wrench are specifically designed for clearing stubborn clogs in the discharge line or safely handling pump connections. A drill pump can be invaluable for quickly bailing out water, making the job cleaner and faster.

My sump pump runs continuously; what's the most common cause of this, and how can I fix it?

A constantly running sump pump usually indicates a stuck float switch or a blockage in the discharge line. First, disconnect power and check the float switch for any debris or obstructions preventing it from falling. If the switch is clear, the discharge line might be clogged, requiring the use of a drain snake to clear it out.

The pump motor hums, but no water is being discharged. What should I check first?

If your sump pump motor hums but doesn't move water, the impeller is likely jammed with debris or damaged, or the discharge line is severely blocked. After disconnecting power, access the impeller area and carefully clear any obstructions. If the impeller is clear, then focus on clearing the discharge line with a drum auger.

Transcript
Hide

through there during a rainstorm and over time and it couldn't silt in the bottom of your bucket so we figure out the first two things we know we've got power we know our sump pumps working we want to make sure that there's no obstructions in the pile you can come outside make sure there's no cracked pipes nothing is going to feed the water flow out of your house so that's how you make sure your sump pump is operating correctly check back with us later for more tips on how to keep your basement dry

Auto-generated transcript. May contain errors.