Skip to main content

Troubleshoot Power Issues — Verify Power Supply

Beginner4 hours

Part of project

Sump Pump Repair · Step 1 of 5

Helpful?

In this video

If your sump pump isn't starting, the first step is to check its power source. Begin by inspecting the power cord to ensure it is securely plugged into the electrical receptacle. Next, verify that the receptacle itself is operational; often, a pump might simply be unplugged, or the outlet isn't supplying power. Finally, check your home's circuit breaker box to see if the breaker connected to the sump pump has tripped. If found tripped, reset it. Addressing these simple power-related issues can often resolve the problem without further intervention.

17.6K views27

FAQs

What are the most critical safety precautions I should take before starting any sump pump repair?

Always disconnect power to the sump pump at its circuit breaker before touching anything. Water and electricity are a dangerous combination, so ensure your hands are dry and avoid standing in water. Wear rubber gloves and eye protection to prevent injury from debris or contaminated water.

Do I really need all the specialized tools listed, or can I get by with basic household tools?

While basic screwdrivers and pliers are useful, a voltage tester is essential for safely verifying power. Tools like a drum auger or pipe wrench are specifically designed for clearing stubborn clogs in the discharge line or safely handling pump connections. A drill pump can be invaluable for quickly bailing out water, making the job cleaner and faster.

My sump pump runs continuously; what's the most common cause of this, and how can I fix it?

A constantly running sump pump usually indicates a stuck float switch or a blockage in the discharge line. First, disconnect power and check the float switch for any debris or obstructions preventing it from falling. If the switch is clear, the discharge line might be clogged, requiring the use of a drain snake to clear it out.

The pump motor hums, but no water is being discharged. What should I check first?

If your sump pump motor hums but doesn't move water, the impeller is likely jammed with debris or damaged, or the discharge line is severely blocked. After disconnecting power, access the impeller area and carefully clear any obstructions. If the impeller is clear, then focus on clearing the discharge line with a drum auger.

Transcript
Hide

I'm going to show you how to troubleshoot your sum pump and fix some common problems if your Su pump isn't starting check the power cord to see if it's disconnected if not see if the recepticle is working often times we come down to fix a sump pump and found out it wasn't plugged in the recepticle didn't work or the breaker was just tripped so make sure you check these before moving on now if your pump activates but doesn't push the water out check the impeller to see if it came loose or if it's clogged a continuously

Auto-generated transcript. May contain errors.