Smoothing the Caulk Bead — Smooth the Caulk Bead

Beginner3 hours

Part of project

Bathtub Caulking · Step 6 of 8

Helpful?

In this video

Immediately after applying the caulk, smooth the bead. You can use a damp paper towel wrapped around your fingertip, or simply your wet finger. Gently run your finger along the fresh caulk bead, applying light pressure. This process, known as 'tooling', pushes the caulk into the joint to create a proper seal and removes excess caulk, leaving a smooth, concave, professional-looking finish. Wipe the excess caulk from your finger onto a separate paper towel as you go.

425.7K views7.1K

Ace Hardware

178K subscribers

Transcript

Hide

makes a big mess now I will take a paper towel that is damp and I just wrap it around my finger and I will wipe the caulk so that you spread it smoothly and neatly into the open crevice now you can come back with your gun and add a little bit more if you've missed a few spots or you see it's a little thin and you come back and you work it over just very neatly you can also use a bear finger if you feel like you have good control and you're comfortable doing that you just wipe it off quickly because silicone is sticky and then you come back and you wipe off the excess you do not want your going up the wall and out on the tub you want it to be very neat and you want it to be thin and clean and effective so while we talking

Auto-generated transcript. May contain errors.

Smoothing the Caulk Bead — Smooth the Caulk Bead

Intermediate

3 hours

Part of project

Bathtub Caulking · Step 6 of 8

Was this clip helpful?

In this video

Immediately after applying the caulk, smooth the bead. You can use a damp paper towel wrapped around your fingertip, or simply your wet finger. Gently run your finger along the fresh caulk bead, applying light pressure. This process, known as 'tooling', pushes the caulk into the joint to create a proper seal and removes excess caulk, leaving a smooth, concave, professional-looking finish. Wipe the excess caulk from your finger onto a separate paper towel as you go.

425.7K views7.1K

Based on content fromAce Hardware· 178K subscribers

Video Transcript

(730 characters)

Hide

makes a big mess now I will take a paper towel that is damp and I just wrap it around my finger and I will wipe the caulk so that you spread it smoothly and neatly into the open crevice now you can come back with your gun and add a little bit more if you've missed a few spots or you see it's a little thin and you come back and you work it over just very neatly you can also use a bear finger if you feel like you have good control and you're comfortable doing that you just wipe it off quickly because silicone is sticky and then you come back and you wipe off the excess you do not want your going up the wall and out on the tub you want it to be very neat and you want it to be thin and clean and effective so while we talking

Transcript may be auto-generated and contain errors.