Skip to main content

Final Transmission Separation and Lowering

15:35
22:12
26.5K views

At 15:35 in

Ralph Returns! Destroyed 6L80 Comes Out Using Questionable Methods...(72 LSA Monte Carlo Build)

What happens here

With all other connections and fasteners removed (except the bottom two bellhousing bolts), the car is slowly lowered, allowing the transmission to fully separate from the engine and settle onto the improvised table support. Some transmission fluid spills onto the table and cardboard placed underneath. The car is then raised back up, leaving the transmission resting on the table.

Goal: Separate the transmission from the engine and secure it on the table

Tools and materials

  • Car Lift BendPak — Lowering the car and raising it after transmission separation
  • Cardboard — Absorbing spilled transmission fluid
  • Transmission GM 6L90 — The removed component
  • Wooden Table — Supporting the transmission after removal
  • Transmission Fluid — Spilled from the removed transmission

What they say

Hide

i want to see it snap in half we're gonna lower this onto the table i wish i had some kind of like sub table to put this on but there's nothing really in here i'd be willing to sacrifice as a sub table that would get dirty so we're just going to lower it now remember i left the bottom two bolts in and i'll do those once it's resting on there but we're not gonna completely lay it on there because the weight uh once it's resting on something it'll still be hooked onto the dowels in the back of the engine we're gonna get it on there and then lightly aggressively pop it off it'll probably plop down a couple inches and that'll be logan's favorite part and we'll find out if table breaks or not [Music] why notice me not stopping oh no oh the humanity that's the hindenburg you guys even know about the hindenburg and you logan you know what the hindenburg is i told you about the hindenburg like a month ago who knows what the hindenburg is leave a comment hindenburg history crew because there was a news broadcast and it was going down where the guy's going oh the humanity he pulled that plug out of the way yeah there you go out of the squish zone here moment of truth you're gonna have to sit on your butt to do that okay we got a good bit of weight settled in when we just needle ski on in here so it's kind of like working on the floor but not i'm gonna need a different socket i'll take this one what do you want maybe it will uh deep well 15 on a ratchet okay so it just crawled out getting the last bolt out of there the transmission is completely free blow it down a little bit more okay where do you want me to go okay film the table transmission and stuff are you sure the table's not bad or not too far forward it's good now okay it's pretty loose now i think the engine is actually gonna plop down now let's pick the car up and the transmission should stay on the table and the engine will plop down probably uh aggressively ready yeah [Music] no it's still there it goes i'm backing up i could make this better but there's no theater in that so let's see what happens [Music] did it work or did it work it did but the cardboard didn't work well that's okay no what who's gonna plop it down in the blood well then come up with a better solution we have lots of cardboard i don't know i i would just think you'd wipe this somewhere with what i don't know my favorite towels that's a waste of paper towels look at this gross cardboard it'll soak it up okay or smash it into the table…

Auto-generated from the video audio.