Skip to main content

Understand Drywall Joints (Tapered vs. Butt)

0:21
1:31
56.9K views

At 0:21 in

How to hang drywall

What happens here

Familiarize yourself with the two main types of drywall edges: tapered ends and butt ends. A full sheet of drywall typically has two tapered ends (along the longer edges) and two butt ends (along the shorter edges). When two butt ends meet, they form a 'butt joint,' which is inherently harder to mud smoothly because there's no recessed area for the joint compound. Conversely, tapered ends create a slight recess when joined, making it much easier to apply mud and tape for a flat, seamless finish. Therefore, always strive to position your drywall sheets so that tapered ends meet whenever possible to simplify the mudding process.

Goal: Optimize drywall joint placement for easier mudding

Tools and materials

  • Drywall Sheets — Understanding edge types

What they say

Hide

hang it vertically and it's just situationally based. A full sheet of drywall has two tapered ends and two butt ends. When two butt ends come together, it's called a butt joint and it's a little bit harder to mud. Try to keep all your finished tapered ends together whenever you can. It's a lot easier to mud. You can probably see the hump here and the hump here. Once you put your mud in there and your tape, this will create a smooth surface all the way down. You are going to have to mud butt ends at some point and I'll show you that in a future video. Make sure that you stagger your butt joints

Auto-generated from the video audio.