Skip to main content

Screwing Drywall (Tapered Ends & Field)

1:02
1:31
56.9K views

At 1:02 in

How to hang drywall

What happens here

When fastening drywall sheets to the studs, always start screwing in the center of the sheet and work your way outwards towards the edges. This technique helps to flatten the sheet against the studs, preventing bulges or gaps. For screws placed along the tapered ends and in the field (the main body of the drywall sheet), position them approximately 3/8 of an inch from the tapered edge and space them every 12 inches along the studs. Drive the screws until the head is slightly recessed below the paper surface, but not so deep that it breaks the paper.

Goal: Secure drywall sheets properly to studs

Tools and materials

  • Drywall Screws — Fastening drywall to studs
  • Impact Driver Milwaukee FUEL — Driving screws into drywall
  • Measuring Tape — Measuring screw spacing
  • Pencil — Marking screw locations
  • Safety Glasses — Protecting eyes from debris

What they say

Hide

way down helps prevent cracking in the mud. Leave at least a half inch gap on the bottom of your drywall so moisture doesn't go up into your drywall. When you go to screw up your drywall, always start in the center and work your way out. Fasten your drywall 3/8 of an inch on your tapered end and put a screw every 12 inches in the field. Working on the butt end of your drywall, put your screws 5/8 of an inch in and put them every 8 inches. So, I know the drywall looks extremely

Auto-generated from the video audio.