Skip to main content

Leave Gap at Bottom for Moisture Control

0:56
1:31
56.9K views

At 0:56 in

How to hang drywall

What happens here

To prevent moisture from wicking up into your drywall sheets from the floor, leave at least a 1/2-inch gap between the bottom edge of the drywall and the subfloor or concrete slab. This gap allows for proper ventilation and prevents potential water damage or mold growth, especially in areas prone to moisture.

Goal: Prevent moisture damage to drywall

Tools and materials

  • Drywall Sheets — The material being installed
  • Measuring Tape — Measuring the gap

What they say

Hide

and you don't railroad your seams like this. Don't have one seam going all the way down and this seam going all the way across and so on. Having the seam that ends right here instead of goes all the way down helps prevent cracking in the mud. Leave at least a half inch gap on the bottom of your drywall so moisture doesn't go up into your drywall. When you go to screw up your drywall, always start in the center and work your way out. Fasten your drywall 3/8 of an inch on your tapered end and put a screw every 12 inches in the field.

Auto-generated from the video audio.