Skip to main content

Screwing Drywall (Butt Ends)

1:12
1:31
56.9K views

At 1:12 in

How to hang drywall

What happens here

For screws placed along the butt ends of the drywall sheets, the spacing and distance from the edge are slightly different compared to tapered ends. Place these screws approximately 5/8 of an inch from the butt end and space them every 8 inches along the studs. This closer spacing helps to better secure the potentially more difficult-to-finish butt joint. Ensure screws are driven just below the surface of the paper, creating a slight dimple.

Goal: Secure butt joints effectively

Tools and materials

  • Drywall Screws — Fastening drywall to studs
  • Impact Driver Milwaukee FUEL — Driving screws into drywall
  • Measuring Tape — Measuring screw spacing
  • Pencil — Marking screw locations
  • Safety Glasses — Protecting eyes from debris

What they say

Hide

start in the center and work your way out. Fasten your drywall 3/8 of an inch on your tapered end and put a screw every 12 inches in the field. Working on the butt end of your drywall, put your screws 5/8 of an inch in and put them every 8 inches. So, I know the drywall looks extremely dirty and used and it has a bunch of holes everywhere. That's because it is. It was hanging on the ceiling up here. I just took it down and I'm going to use it on this weld room so I can save both time and money. But anyways, I got

Auto-generated from the video audio.