Skip to main content

Prepare the Leg Pieces

0:04
1:40
8.3K views

At 0:04 in

DIY tomato cages

What happens here

Begin by selecting your lumber. The creator uses what appears to be reclaimed wood, possibly from pallets or fence pickets. Using a miter saw, cut four pieces of lumber, which will serve as the vertical legs of the tomato cage, to a length of 54 inches each. After cutting, take each 54-inch board and carefully rip it in half lengthwise using a table saw. The creator mentions his boards are initially 1 5/8 inches wide, so ripping them creates two narrower strips. Finally, adjust the miter saw to a 45-degree angle and cut one end of each leg piece to a point, which will help them penetrate the ground more easily during installation.

Goal: Cut and shape the vertical supports for the tomato cage.

Tools and materials

  • Lumber — The primary material for constructing the tomato cage legs
  • Measuring Tape — Accurately measuring cut lengths
  • Miter Saw Milwaukee — Cutting lumber to length and creating angled cuts
  • Push Stick — Safely guiding wood through the table saw blade
  • Safety Glasses — Protecting eyes from sawdust and flying debris
  • Table Saw — Ripping lumber lengthwise to create narrower strips

What they say

Hide

Stop buying flimsy tomato cages and build one that lasts. So, for your legs, go ahead and cut them down to 54 in. Once you have one of them cut, this one will make two legs. Now, I'm just going to rip these boards in half on the table saw. In my case, they're an inch and 5/8. Okay, now that I got all these boards cut, I'm just going to throw a 45 on the end here so they dig in the ground better. Now that we've finished up our legs, we're going to do our cross members. So,

Auto-generated from the video audio.