Skip to main content

Assemble the Cage Structure

1:11
1:40
8.3K views

At 1:11 in

DIY tomato cages

What happens here

Now that you have two assembled side panels, stand them upright and parallel to each other. Use the remaining eight narrower 18-inch cross members to connect these two panels and form the three-dimensional cage structure. Place one cross member at each corner level (top, 12-inch, 24-inch, and 36-inch marks) between the two side panels. Ensure the cage is square. Similar to assembling the side panels, pre-drill pilot holes at each connection point through the cross member and into the legs of the side panels, then secure them with triple-coated deck screws. This will create a sturdy, four-sided, multi-tiered tomato cage.

Goal: Connect the side panels to form a complete three-dimensional tomato cage.

Tools and materials

  • Assembled Side Panels N/A — The primary components being joined to form the cage
  • Cordless Drill — Pre-drilling and driving screws
  • Cross Members — Connecting the side panels
  • Drill Bit Set — Creating pilot holes
  • Triple-Coated Deck Screws — Securing the cross members

What they say

Hide

the weather. So, once you finish your two sides, you're going to put four more boards this way all the way down. And make sure that you guys are pre-drilling all of these screws before you put them in. Just going to mark 6 in. This is how deep I'm going to pound these into the ground. I don't know about y'all, but I

Auto-generated from the video audio.