Skip to main content

Prepare the Cross Members

0:25
1:40
8.3K views

At 0:25 in

DIY tomato cages

What happens here

Next, prepare the cross members that will form the horizontal supports of the cage. Using the miter saw, cut a sufficient number of pieces of lumber to 18 inches each. For one cage, you will need 16 cross members initially. Similar to the legs, take each 18-inch cross member and rip it in half lengthwise on the table saw to create narrower strips. These narrower pieces will be used for both the side panels and the connecting pieces of the cage.

Goal: Cut and rip the horizontal support pieces for the cage.

Tools and materials

  • Lumber — Material for the cross members
  • Measuring Tape — Measuring the 18-inch lengths
  • Miter Saw Milwaukee — Cutting lumber to 18-inch lengths
  • Safety Glasses — Eye protection during cutting
  • Table Saw — Ripping the 18-inch pieces in half lengthwise

What they say

Hide

Okay, now that I got all these boards cut, I'm just going to throw a 45 on the end here so they dig in the ground better. Now that we've finished up our legs, we're going to do our cross members. So, go ahead and I did those at 18 in. So, we need 16 of them per cage. All right, now I got all these cross members cut down to 18 in. I'm just going to rip them in half on the table saw. All right, now I got everything cut. I'm going to go ahead and I'm just going to mark these legs. 12

Auto-generated from the video audio.