Skip to main content

Assemble Side Panels

0:50
1:40
8.3K views

At 0:50 in

DIY tomato cages

What happens here

With the leg pieces marked, it's time to assemble the two side panels. Take two of the prepared leg pieces and lay them flat on your work surface. Position four of the narrower 18-inch cross members onto the leg pieces, aligning them with the marks you made at 12, 24, and 36 inches. Place an additional cross member at the very top, flush with the ends of the legs. Using a cordless drill, pre-drill pilot holes through the cross members and into the leg pieces at each connection point. This prevents the wood from splitting. Then, secure each cross member to the legs using triple-coated deck screws. Repeat this process to assemble a second identical side panel.

Goal: Construct two ladder-like side frames for the tomato cage.

Tools and materials

  • Cordless Drill — Pre-drilling pilot holes and driving screws
  • Cross Members — The horizontal components of the side panels
  • Drill Bit Set — Creating pilot holes slightly smaller than the screw diameter
  • Leg Pieces — The vertical components of the side panels
  • Triple-Coated Deck Screws — Securing the cross members to the legs

What they say

Hide

24 36. All right, now once you got your pieces marked, you can take your little ones here, your cross members and you can just throw them right on there. This one will go here. And it'll look just like this. I'm using these triple coated deck screws, so hopefully they last longer in the weather. So, once you finish your two sides, you're going to put four more boards

Auto-generated from the video audio.