Skip to main content
Stesso

Sand and Condition Tabletop

3:38
7:21
31.7K views

At 3:38 in

DIY Farmhouse Dining Table

Watch on YouTube

What happens here

The entire tabletop surface is thoroughly sanded to achieve a smooth, uniform finish. An orbital sander is used for the main surfaces, progressing through various grits (e.g., 80, 120, 180, 220) to remove any imperfections, glue squeeze-out, or marks from previous steps. After sanding, the tabletop is carefully wiped down with a clean cloth to remove all dust, ensuring a clean surface for finishing. A pre-stain wood conditioner (Varathane brand) is then applied with a foam brush to promote even stain absorption, especially on softwoods like pine, which can otherwise result in blotchy finishes.

Goal: Prepare the tabletop for staining and a smooth finish

Tools and materials

  • Clean Cloth — To wipe away dust from sanding
  • Foam Brush — To apply the wood conditioner
  • Orbital Sander — To sand the tabletop surface smooth
  • Sandpaper — To smooth the wood surface

What they say

Hide

to 120 to 220 grit cleaning up the entire tabletop the edges and especially blending the dowels down with the breadboard ends once that was finished I took my palm router with a 3/8 round over bit and I grooved out all the edges to make him as smooth as possible getting ready for the finish when it comes to applying finish Douglas fir and pine tend to be pretty blotchy when it comes to applying stain so to prevent that I use a pre stain this is particular time I'm using a product from Vera Thayne I applied it with a sponge brush that's usually my go-to method I let it sit for 30 to 45 minutes before wiping off all the excess with a rag once the pre-stain is ready for the

Auto-generated from the video audio.