Skip to main content
Stesso

Assemble and Clamp Tabletop Panels

0:57
7:21
31.7K views

At 0:57 in

DIY Farmhouse Dining Table

Watch on YouTube

What happens here

The individual boards for the main tabletop are assembled by applying a generous amount of wood glue, specifically Titebond II, along the full length of their mating edges. After applying glue, the boards are carefully aligned and brought together. Pipe clamps are then used to apply even pressure across the entire width of the tabletop, squeezing the boards together tightly to create strong, seamless glue joints. Excess glue is allowed to squeeze out, indicating good coverage.

Goal: Form the main tabletop panel by gluing and clamping boards

Tools and materials

  • Pipe Clamps — To apply pressure and hold the glued boards together while the glue dries
  • Sawhorses — To support the tabletop during assembly
  • Wood Glue Titebond II — To join the wooden boards together to form the tabletop

What they say

Hide

saw to get it to our absolute finished dimensions once our boards were rated Warkworth we decided to start the glue a process for the glue a process we broke it down to two separate parts three boards at a time mostly because my clamps don't extend as far once they were dry I then brought the entire two pieces together creating the entire table using the two clamps that would work as extenders let it sit overnight and then we're ready for the hard work the next day I removed all the clamps

Auto-generated from the video audio.