Skip to main content
Stesso

Drill Mounting Holes in Metal Base

5:50
7:21
31.7K views

At 5:50 in

DIY Farmhouse Dining Table

Watch on YouTube

What happens here

To prepare the metal base for attachment to the wooden tabletop, pilot holes are drilled into the top crossbars of the metal frame. A drill, specifically a DeWalt cordless drill, fitted with a suitable metal drill bit is used to create these holes. The placement of these holes should align with the desired attachment points on the underside of the tabletop, ensuring secure fastening.

Goal: Create attachment points on the metal base for the tabletop

Tools and materials

  • Cordless Drill DeWalt — To drill pilot holes into the metal frame
  • Metal Drill Bit — To create clean holes in the metal tubing

What they say

Hide

careful to watch those run off now when it comes to installing the tabletop to the table base and using a panel glue up kind of system you always want to consider wood movement wood will move whether it's hot or cold warm dry humid not humid so what you want to do is kind of give it the best opportunity to move without being loose on your table so the way I do it is you typically create a larger hole on the table base itself keep the slot or the hole on the tabletop itself very snug and then the screws that I use will have a washer the

Auto-generated from the video audio.