Skip to main content

Verifying Square Accuracy (Flip Test)

0:13
1:05
239.3K views

At 0:13 in

Combination square uses

What happens here

Perform a 'flip test' to check the accuracy of the combination square itself. Draw a line along one edge of the square, then flip the square over and draw another line. If the lines do not perfectly match, the square is out of true and needs calibration or replacement.

Goal: Ensure the combination square is accurate.

Tools and materials

  • Combination Square — The tool being tested for accuracy
  • Pencil — Drawing test lines
  • Wooden Board — A flat surface to draw test lines on

What they say

Hide

can do. Let's get after it. Obviously, you can check inside corners and outside corners for square. You can also mark 90s and 45s. But, how do you know that your square is actually square? Draw a line, flip your square, and draw another line. If these lines don't match up, something's off. Now, say that you need to line an inch in from the edge of your board. Set your measurement and lock it down. And just slide it along the edge of your board. You can even slide your ruler out and just use it by itself.

Auto-generated from the video audio.