Skip to main content

Setting Table Saw Blade Height

0:38
1:05
239.3K views

At 0:38 in

Combination square uses

What happens here

Utilize the combination square to precisely set the height of a table saw blade. Place the square's head on the table saw surface and extend the ruler to the desired blade height, then adjust the blade until it touches the ruler, setting the cut depth accurately.

Goal: Set table saw blade height accurately.

Tools and materials

  • Combination Square — Setting the height of the table saw blade
  • Table Saw Ridgid — The power tool whose blade height is being set

What they say

Hide

ruler out and just use it by itself. But, what if you need to measure the depth? Put your head on the piece, push your ruler down, lock it in place. That depth is the same across this whole board. And that same trick works in reverse when you want to set the height of your saw. And now we know that the height of our saw blade is an inch. You can also use your combination square to make sure that your blade's square. It also works well for setting the depth on your router. And once you're ready to install whatever you're building, most combo squares also have a level. And

Auto-generated from the video audio.