Skip to main content

Setting and Scribing Parallel Lines

0:20
1:05
239.3K views

At 0:20 in

Combination square uses

What happens here

Set the combination square to a specific measurement (e.g., one inch) from the edge of a board and lock it in place. Then, slide the square along the edge of the board with a pencil to create a perfectly parallel scribe line.

Goal: Create consistent parallel lines for layout.

Tools and materials

  • Combination Square — Setting and scribing a measurement
  • Pencil — Drawing the scribe line
  • Wooden Board — The workpiece on which to scribe a line

What they say

Hide

also mark 90s and 45s. But, how do you know that your square is actually square? Draw a line, flip your square, and draw another line. If these lines don't match up, something's off. Now, say that you need to line an inch in from the edge of your board. Set your measurement and lock it down. And just slide it along the edge of your board. You can even slide your ruler out and just use it by itself. But, what if you need to measure the depth? Put your head on the piece, push your ruler down, lock it in place. That depth is the same across this whole

Auto-generated from the video audio.