Skip to main content

Checking Inside and Outside Corners

0:04
1:05
239.3K views

At 0:04 in

Combination square uses

What happens here

Demonstrate the fundamental use of the combination square to check both inside and outside 90-degree corners on a wooden frame. This verifies the squareness of assembled components.

Goal: Verify the squareness of corners.

Tools and materials

  • Combination Square — Checking the squareness of corners
  • Wooden Frame — As an example workpiece for checking corners

What they say

Hide

You're probably only using half your combination square. Here's what else I can do. Let's get after it. Obviously, you can check inside corners and outside corners for square. You can also mark 90s and 45s. But, how do you know that your square is actually square? Draw a line, flip your square, and draw another line. If these lines don't match up, something's off. Now, say that you need to line an inch in from the edge of your board. Set your measurement and lock it

Auto-generated from the video audio.