Skip to main content

Measuring Depth with the Ruler Head

0:27
1:05
239.3K views

At 0:27 in

Combination square uses

What happens here

Demonstrate how to slide the ruler out of the combination square's head and use the head as a depth gauge. Place the head on the surface of a workpiece, push the ruler down into a groove or hole until it bottoms out, then lock it to measure the depth.

Goal: Accurately measure the depth of cuts or holes.

Tools and materials

  • Combination Square — Measuring depth
  • Wooden Block with Groove — An example workpiece with a groove for depth measurement

What they say

Hide

something's off. Now, say that you need to line an inch in from the edge of your board. Set your measurement and lock it down. And just slide it along the edge of your board. You can even slide your ruler out and just use it by itself. But, what if you need to measure the depth? Put your head on the piece, push your ruler down, lock it in place. That depth is the same across this whole board. And that same trick works in reverse when you want to set the height of your saw. And now we know that the height of our saw blade is an inch. You can also use your combination square to

Auto-generated from the video audio.