Skip to main content
Stesso

Cut & Edge Cooler Side Panels

1:14
7:38
35.3K views

At 1:14 in

Built-In Camping Grill with Cooler Cart

Watch on YouTube

What happens here

Cut additional 1x4 cedar boards to the dimensions needed for the side panels of the cooler compartment (approximately 17.25 inches wide and 27 inches long, based on cooler dimensions). Once cut, use a trim router equipped with a 3/8 inch round-over bit to create a smooth, rounded edge on all exposed sides of these panels. This step provides a professional and clean finish to the visible edges.

Goal: Prepare the side panels for the cooler compartment with precise dimensions and rounded edges.

Tools and materials

  • 3/8 inch Round-Over Bit — Creating rounded edges
  • Circular Saw DeWalt — Cutting lumber to the specified dimensions
  • Pencil — Marking cut lines
  • Tape Measure — Accurately measuring panel dimensions
  • Trim Router Makita — Rounding the edges of the wood panels
  • 1x4 Cedar Boards — Forming the side panels of the cooler compartment

What they say

Hide

inch so long I was ready to get started on the cooler part and attaching the panels to it once all the corners were assembled I then started cutting up the panel pieces that create the sides of the cooler for the width it was seventeen and a quarter and for the length came out to be 27 inches long before installing all the side panels I found that going over all the edges with a 3/8 round over bit gave it a really nice clean look once I was ready I then used a little bit of wood glue and some screws our

Auto-generated from the video audio.